MARCH PUMP, TE-5M-MD 1000 GPH 115/220v 50/60HZ MAGNETIC DRIVE PUMP
Suitable for marine air conditioning units, salt water and fresh water applications.
Max Flow
|
18 GPM
|
68.1 LPM
|
Max Head
|
29 FT
|
8.85 M
|
Power
|
0.2 HP
|
0.149 KW
|
Electrical
|
115/230V 50/60HZ
|
Inlet
|
1"FPT
|
Outlet
|
1/2"MPT
|
Wet End
|
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
|
Uses
|
Open Air
|
Summary Paragraph March Pump’s industrial TE-5M-MD is an American seal-less centrifugal magnetic drive pump ideal for marine applications. It is capable of generating a maximum flow of 17 gallons per minute at 4 feet, and its maximum head is 29 Feet (12PSI). It is capable of 50,000 BTU per hour. The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Polypropylene, Carbon, Viton, 316 Stainless Steel, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 60 hertz 115/230V and 50 hertz 110/220V 0.2 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius.
The pump is Ignition Protected per SAE J1171 and ISO 8846. The impeller has a carbon bushing allowing the pump to run dry longer before suffering damage.
TE-5M-MD Pump Manual
WARNING: California residents please see- www.P65Warnings.ca.gov