Toshiba R410A High Efficiency Compressor
The Integra series bear Japanese Toshiba compressor. Latest technology Toshiba rotary compressors deliver high efficiency performance with low noise level.
High Static Centrifugal Blower
Specially designed blower wheel and scroll cage produce high static output with low noise level. Designed by German Aerodynamic engineers for an exact fit to the Integra units.
Built-in High Pressure and Low Pressure Gauges
The Integra series are equipped with built in high pressure and low pressure gauges. Built-in pressure gauges bring easiness to monitor the air conditioner and diagnose how healthy it is operating. The gauges are installed in an angle that makes it readable horizontally and vertically.
Compressor Sound Cover
The Integra come with sound cover around the compressor compartment as standard accessory. The sound covers reduce the noise level by 60%.
360 Degree Rotatable Blower
The unique design makes very easy to rotate the blower outlet. The blower can be rotated in any angle within minutes.
Environmentally Friendly with new R410A Refrigerant
As standard, all The Integra series come with R410A refrigerant pre-charged. The new refrigerant R410A is not only environmentally friendly, it also provides higher heating and cooling efficiency for low energy consumption.
Easy Charging Port
Thanks to its 1/4" NPT standard charging port, The MSBA series are the easiest units in the market for charging refrigerant. There is no need to remove the unit or disassemble any part
Hydrophilic Coated Aluminum Fins
Hydrophilic coating on the aluminum fins makes the condensate water to slide down easily. Water drops do not stick to the fins and this feature prevent pressure drop for better air flow. The hydrophilic coating also provide strength to the coil in seawater environment to last 50% longer than regular coils.
Washable Return Filter
Washable/permanent return filter protects the coil from dust and other particles in the air. This filter is a secondary filter to field installed filtered return grille. This feature makes sure that the coil is not blocked and clean air is circulated all the time.
3 Row Inner grooved Copper tube
Contrary to the competitors have only 2 row coil, the The Integra unit's Evaporator coil is made of 3 Row coil. Inner groove in the copper tubes create turbulence and increased heat exchange capacity. This feature provide better efficiency, low energy consumption and ice cold air through the outlets.
Stainless Steel Bottom panel
Bottom panel is made of heavy gauge high quality 316 grade stainless steel material. The panel will last decades free from corrosion and rust.
Vibration absorbers
Vibration absorbers provide isolation between boat and the air conditioner. This feature prevents the vibration from the boat engine to be passed to the air conditioner, enabling the compressor, fan and other components to operate healthier.
High Efficiency Coaxial Heat Exchanger
The premium quality Copper-Nickel heat exchanger provide very high heat exchange capacity. Perfect for sea water and fresh water
Lifting Hook
Lifting hook bring easiness to handle the unit during installation and maintenance. since the competitor's products have no place to hold their units, they usually have damages to the unit during installation, or injuries occur to the installer.
Molded Plastic Parts and covers
Specially designed molds and plastic parts make the unit lighter in weight and stronger against corrosion and rust. Contrary to the other products that made of sheet metals that rust within few months, our products can last decades free from Corrosion and rust.
